• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ASSIGNMENT QUESTIONS - 14071_531
ASSIGNMENT QUESTIONS - 14071_533

Engineering Aid 2 - Intermediate Structural engineering guide book
Page Navigation
  500    501    502    503    504  505  506    507    508    509    510  
4-43. The NAVFAC P-405 is based on 1. general  construction  knowledge 2. timed  sample  projects 3. Seabees'  experience 4. the dart board theory 4-44. Quantity estimates serve a variety of purposes. Which of the follow- ing items is NOT based on the quantity estimate? 1. Start dates 2. Manpower  needs 3. Delivery  schedules 4. Equipment  needs 4-45. What method is recommended to check your quantity estimate? 1. Do  two  separate  estimates yourself 2. Have  someone  review  your estimate 3. Have someone else do an estimate  and  then  compare it with your results 4. Have two people do an estimate at the same time and compare their results 4-46. When  preparing  a  material  estimate, you do NOT need to read drawing notes to have an accurate estimate. 1. True 2. False 4-47. All drawings are NOT drawn to scale. You cannot scale them to obtain  information  for  an  estimate. 1. True 2. False 4-48. Omissions  in  material  estimations are  the  result  of  careless examination.  Which  of  the following  examples  results  in omissions? 1. Failure  to  check  for  revisions 2. Failure to ensure all the pages are  available 3. Failure to review the specifications 4. All of the above 4-49. Your  material  estimate  calls  for 100 board feet of 2 x 4s. Should you  order  the  exact  amount? 1. No, you must allow for a waste factor 2. Yes,    this is the amount needed 3. No, you must allow for excess material  build  up  for  future projects 4-50. The term  bulk  material  refers  to which of the following materials? 1. Concrete 2. Prime  coat  material 3. Crushed  rock 4. Each of the above 4-51. You  are  calculating  an  estimate  for fill. What reference provides you the compaction factor for a particular type of fill? 1. NAVFAC  P-315 2. NAVFAC  P-405 3. NAVFAC  P–437 4. NAVEDTRA  12540 Learning  Objective:  Describe  the contents and use of NAVFAC P-437 for  the  planning  and  installation of  ABFC  components,  facilities, and  assemblies. 4-52. Which  of  the  following  NAVFAC publications  contains  estimating information  on  common  facilities and  assemblies? 1. NAVFAC  P-315 2. NAVFAC  P-437,  Volume  I 3. NAVFAC P-437, Volume II 4. NAVFAC  P-405 4-53. What is an NMCB according to the P-437? 1. P-25, component 2. P-25,  assembly 3. P-26,  facility 4. P-26,  component 26







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.