Figure 14-30.--Carrying and cradle positions.
WARNING
Remove the launcher from the carrying position
and cradle it in your left arm (fig. 14-30).
KEEP WEAPON POINTED TOWARD
Remove the transport safety pin by pulling it out
TARGET. CHECK BACKBLAST AREA.
with your right hand and releasing it (Step 1, fig. 14-31).
NOTE: Be sure that the transport safety pin is
Cock the launcher (Step 4, fig. 14-31) by
attached to the lanyard and the lanyard is attached to the
unfolding the cocking lever with your right hand. Place
launcher. If it is not, retain the transport safety pin (it
your thumb under the cocking lever and, with the
must be reinserted if the launcher is not fired).
support of your fingers in front of the firing mechanism,
push the cocking lever forward and then downward to
Unsnap the shoulder stop and unfold it (Step 2,
the right. Let the cocking lever slide back
fig. 14-31).
Place the launcher on your right shoulder.
CAUTION
Release the sights. Release the front sight by
pressing down on the sight cover and sliding the cover
to the rear. Release the rear sight by pressing down on
DO NOT REFOLD THE COCKING
the rear sight cover and sliding the cover to the front.
LEVER. THIS WILL INTERFERE WITH
Each sight pops up after release procedures (Step 3, fig.
THE FUNCTION OF THE FIRING
14-31).
MECHANISM.
14-24
