COSAL supports the equipment. If it does not, promptly
report the full nameplate data of the equipment, its
service application, and the quantity installed according
to OPNAVINST 4790.4. Impress the importance of this
verification upon all personnel in the engineering
department who are authorized to prepare requests.
You may order NC material only for DTO and only
when it is required for immediate use. You can order
repair parts and consumables that are not allowed by the
COSAL and/or usage ONLY if you submit an in-excess
requisition via the type commander for approval. We’ll
discuss the criteria for in-excess and not-in-excess
requisitions later in the chapter.
Figure 5-10.-Repair part technical data document, NAVSUP form 1348-6.
MILITARY STANDARD REQUISITIONING
AND ISSUE PROCEDURE (MILSTRIP)
MILSTRIP provides the forms and procedures used
to requisition material. The Uniform Material
Movement and Issue Priority System (UMMIPS)
provides the method used to assign priorities for the
issue and movement of that material; we’ll discuss
UMMIPS later in this chapter.
MILSTRIP permits processing of requisitions by
electric accounting machine/automatic data processing
(EAM/ADP). Much of the information formerly written
out is now converted to codes that provide a common
5-17
