3-20.
Standard drawing sheet sizes are
used for what primary reason?
1.
To standardize the size of all
drawings
2.
To eliminate the waste of
expensive tracing paper
3.
To ensure that the supply
department orders the correct
sizes of trading paper
4.
To facilitate filing
3-21.
What are the dimensions of a size
3-22.
3-23.
3-24.
3-25.
3-26.
“C” sheet of drawing paper?
1.
11 in by 17 in
2.
17 in by 22 in
3.
22 in by 44 in
4.
34 in by 44 in
What are the actual dimensions
inside the border lines on a size
“D” sheet of drawing paper?
1.
20 in by 33 in
2.
21 in by 32 in
3.
21 in by 33 in
4.
21 in by 32½ in
On a sheet of “F” size drawing
paper, what should be the
dimensions between the trim lines?
1.
27½ in by 39½ in
2.
28
in by 40 in
3.
34
in by 44 in
4.
33½ in by 43½ in
What is the primary purpose of the
title block on a drawing?
1.
To describe the drawing
2.
To tell who drew the drawing
3.
To specify who is ultimately
responsible for the drawing
4.
To identify the drawing
The title block is generally
located in what part of the
drawing?
1.
Lower right corner
2.
Lower left corner
3.
Lower center
4.
Upper right corner
On a construction drawing, the
revision block is placed at what
corner of the drawing?
1.
Lower right
2.
Lower left
3.
Upper right
4.
Upper left
IN
Figure 3A
ANSWERING QUESTIONS 3-27 THROUGH 3-29,
REFER TO FIGURE 3A.
3-27.
3-28.
3-29.
3-30.
In what space should the terms “as
shown, “as noted,” or “none” be
correctly entered?
1. E
2. G
3. I
4. J
The five-digit
identifies the
number that
government activity
responsible for the design of the
item is entered in what space?
1. D
2. E
3. F
4. H
What space holds the name of the
drafter preparing the drawing?
1. A
2. D
3. E
4. J
What information about the drawing
is indicated when the revision
block contains the following
symbol?
1.
It is the third change
incorporated in the second
revision
2.
It is the third change
incorporated in the third
revision
3.
It is the second change
incorporated in the second
revision
4.
It is the second change
incorporated in the third
revision
17
