ASSIGNMENT  3 Textbook  Assignment:  “Horizontal  Construction.”  Pages  3-1  through  3-19. Learning  Objective:  Identify and  describe  road  nomenclature and associated terminology used in  construction  drawings. 3-1. Which of the following is NOT an example of a military road? 1. Two-lane  highway 2. Airfield  runway 3. Parking  apron 4. Quarry hauling road A. Cut B. Final  grade C. Existing  grade D. Fill E. Subgrade F. Surface Figure 3A IN  ANSWERING  QUESTIONS  3-2  THROUGH  3-5, SELECT FROM FIGURE 3A THE TERM THAT IS BEST DEFINED BY THE QUESTION. 3-2. The   completed   road   surface elevation. 1.  B 2.  C 3.  E 4.   F 3-3. The undisturbed earth on an initial survey. 1.  B 2.  C 3.  E 4.   F 3-4. 3-5. 3-6. 3-7. 3-8. The distance required to get down to the final grade. 1.  A 2.   B 3.   D 4.   F The portion of the road that is at final grade. 1.  C 2.  D 3.  E 4.   F What term best describes the difference  in  elevation  between the edge of the finished road and  the  center  line? 1. Slope  ratio 2. Superelevation 3. Crown 4. Roadway What term defines the limits of the earthwork for a road? 1. Roadbed 2. Shoulder 3. Traveled  way 4. Roadway You are the notetaker on a road survey  crew.  All  man-made  objects should be noted in the book in what manner? 1. By  station  number  only 2. By  distance  from  the  center line only 3. By  station  number  and  distance from the center line 4. By  the  approximate  location  and distance 15